Voltesta

Hub motor vs mid-drive: trade-offs

, 1 min read

Where you put the motor shapes how an EV rides and how easy it is to service.

Hub motor: motor in the wheel

A hub motor lives inside the wheel. It is simple, has no chain or belt to the wheel, and keeps the frame clean. The downsides are more unsprung weight (which hurts ride and handling a little) and that a motor fault means removing the wheel.

Mid-drive: motor at the frame

A mid-drive sits at the frame and sends power through a gear or belt. It keeps weight low and central for better handling, can use gearing to match torque to the job, and is often easier to service. It adds a drive to maintain.

Hub motors are common on scooters and e-rickshaws for cost and simplicity. Mid-drives appear where handling, gearing or serviceability matter more, such as performance bikes and some cargo vehicles.

Neither is 'better' in general; the right choice depends on cost, ride and how the vehicle will be maintained.

See it move

Gear world: pull or speed, not the most of both. This idea is one of our 3D worlds. Try it here, then open the full lab for guided experiments.

Drag to look around. Use + and − to zoom.

The drive
The job
0Speed (km/h)
0Motor speed (rpm)
0Wheel speed (rpm)
0Torque at the wheel (Nm)
0Push at the tyre (N)
0Holding it back (N)

What this set-up can do

0Push from rest (N)
0Steepest slope it can start on (%)
0Top speed on this slope (km/h):
–0 to 40 km/h on the flat (s)

Push at the tyre against road speed

Push at the tyreHolding it backCurve you keptWhere it is now

Reading the picture

  • The yellow spoke on each wheel and the marks on the pulleys show how fast each part turns.
  • The yellow dot on the chart is where the vehicle is now.
  • The crate grows with the load.

Every value here comes from a teaching model running in your browser, with typical figures. They are not measurements from real hardware.

Open the full lab

Talk to Voltesta

Message us on WhatsApp in your own words. A message is ready for you to edit, and we reply within one working day.